NXP MPC57xx Ethernet MAC driver. More...
#include "device_registers.h"
#include "core/net.h"
#include "drivers/mac/mpc57xx_eth_driver.h"
#include "debug.h"
Go to the source code of this file.
Macros | |
#define | TRACE_LEVEL NIC_TRACE_LEVEL |
Functions | |
error_t | mpc57xxEthInit (NetInterface *interface) |
MPC57xx Ethernet MAC initialization. More... | |
__weak_func void | mpc57xxEthInitGpio (NetInterface *interface) |
GPIO configuration. More... | |
void | mpc57xxEthInitBufferDesc (NetInterface *interface) |
Initialize buffer descriptors. More... | |
void | mpc57xxEthTick (NetInterface *interface) |
MPC57xx Ethernet MAC timer handler. More... | |
void | mpc57xxEthEnableIrq (NetInterface *interface) |
Enable interrupts. More... | |
void | mpc57xxEthDisableIrq (NetInterface *interface) |
Disable interrupts. More... | |
void | ENET0_Tx_IRQHandler (void) |
Ethernet MAC transmit interrupt. More... | |
void | ENET0_Rx_IRQHandler (void) |
Ethernet MAC receive interrupt. More... | |
void | ENET0_Err_IRQHandler (void) |
Ethernet MAC error interrupt. More... | |
void | mpc57xxEthEventHandler (NetInterface *interface) |
MPC57xx Ethernet MAC event handler. More... | |
error_t | mpc57xxEthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset, NetTxAncillary *ancillary) |
Send a packet. More... | |
error_t | mpc57xxEthReceivePacket (NetInterface *interface) |
Receive a packet. More... | |
error_t | mpc57xxEthUpdateMacAddrFilter (NetInterface *interface) |
Configure MAC address filtering. More... | |
error_t | mpc57xxEthUpdateMacConfig (NetInterface *interface) |
Adjust MAC configuration parameters for proper operation. More... | |
void | mpc57xxEthWritePhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr, uint16_t data) |
Write PHY register. More... | |
uint16_t | mpc57xxEthReadPhyReg (uint8_t opcode, uint8_t phyAddr, uint8_t regAddr) |
Read PHY register. More... | |
uint32_t | mpc57xxEthCalcCrc (const void *data, size_t length) |
CRC calculation. More... | |
Variables | |
const NicDriver | mpc57xxEthDriver |
MPC57xx Ethernet MAC driver. More... | |
Detailed Description
NXP MPC57xx Ethernet MAC driver.
License
SPDX-License-Identifier: GPL-2.0-or-later
Copyright (C) 2010-2023 Oryx Embedded SARL. All rights reserved.
This file is part of CycloneTCP Open.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- Version
- 2.2.4
Definition in file mpc57xx_eth_driver.c.
Macro Definition Documentation
◆ TRACE_LEVEL
#define TRACE_LEVEL NIC_TRACE_LEVEL |
Definition at line 32 of file mpc57xx_eth_driver.c.
Function Documentation
◆ ENET0_Err_IRQHandler()
void ENET0_Err_IRQHandler | ( | void | ) |
Ethernet MAC error interrupt.
Definition at line 477 of file mpc57xx_eth_driver.c.
◆ ENET0_Rx_IRQHandler()
void ENET0_Rx_IRQHandler | ( | void | ) |
Ethernet MAC receive interrupt.
Definition at line 446 of file mpc57xx_eth_driver.c.
◆ ENET0_Tx_IRQHandler()
void ENET0_Tx_IRQHandler | ( | void | ) |
Ethernet MAC transmit interrupt.
Definition at line 410 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthCalcCrc()
uint32_t mpc57xxEthCalcCrc | ( | const void * | data, |
size_t | length | ||
) |
CRC calculation.
- Parameters
-
[in] data Pointer to the data over which to calculate the CRC [in] length Number of bytes to process
- Returns
- Resulting CRC value
Definition at line 947 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthDisableIrq()
void mpc57xxEthDisableIrq | ( | NetInterface * | interface | ) |
Disable interrupts.
- Parameters
-
[in] interface Underlying network interface
Definition at line 381 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthEnableIrq()
void mpc57xxEthEnableIrq | ( | NetInterface * | interface | ) |
Enable interrupts.
- Parameters
-
[in] interface Underlying network interface
Definition at line 351 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthEventHandler()
void mpc57xxEthEventHandler | ( | NetInterface * | interface | ) |
MPC57xx Ethernet MAC event handler.
- Parameters
-
[in] interface Underlying network interface
Definition at line 509 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthInit()
error_t mpc57xxEthInit | ( | NetInterface * | interface | ) |
MPC57xx Ethernet MAC initialization.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 94 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthInitBufferDesc()
void mpc57xxEthInitBufferDesc | ( | NetInterface * | interface | ) |
Initialize buffer descriptors.
- Parameters
-
[in] interface Underlying network interface
Definition at line 265 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthInitGpio()
__weak_func void mpc57xxEthInitGpio | ( | NetInterface * | interface | ) |
GPIO configuration.
- Parameters
-
[in] interface Underlying network interface
Definition at line 211 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthReadPhyReg()
uint16_t mpc57xxEthReadPhyReg | ( | uint8_t | opcode, |
uint8_t | phyAddr, | ||
uint8_t | regAddr | ||
) |
Read PHY register.
- Parameters
-
[in] opcode Access type (2 bits) [in] phyAddr PHY address (5 bits) [in] regAddr Register address (5 bits)
- Returns
- Register value
Definition at line 900 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthReceivePacket()
error_t mpc57xxEthReceivePacket | ( | NetInterface * | interface | ) |
Receive a packet.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 634 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthSendPacket()
error_t mpc57xxEthSendPacket | ( | NetInterface * | interface, |
const NetBuffer * | buffer, | ||
size_t | offset, | ||
NetTxAncillary * | ancillary | ||
) |
Send a packet.
- Parameters
-
[in] interface Underlying network interface [in] buffer Multi-part buffer containing the data to send [in] offset Offset to the first data byte [in] ancillary Additional options passed to the stack along with the packet
- Returns
- Error code
Definition at line 564 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthTick()
void mpc57xxEthTick | ( | NetInterface * | interface | ) |
MPC57xx Ethernet MAC timer handler.
This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state
- Parameters
-
[in] interface Underlying network interface
Definition at line 326 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthUpdateMacAddrFilter()
error_t mpc57xxEthUpdateMacAddrFilter | ( | NetInterface * | interface | ) |
Configure MAC address filtering.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 715 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthUpdateMacConfig()
error_t mpc57xxEthUpdateMacConfig | ( | NetInterface * | interface | ) |
Adjust MAC configuration parameters for proper operation.
- Parameters
-
[in] interface Underlying network interface
- Returns
- Error code
Definition at line 804 of file mpc57xx_eth_driver.c.
◆ mpc57xxEthWritePhyReg()
void mpc57xxEthWritePhyReg | ( | uint8_t | opcode, |
uint8_t | phyAddr, | ||
uint8_t | regAddr, | ||
uint16_t | data | ||
) |
Write PHY register.
- Parameters
-
[in] opcode Access type (2 bits) [in] phyAddr PHY address (5 bits) [in] regAddr Register address (5 bits) [in] data Register value
Definition at line 858 of file mpc57xx_eth_driver.c.